YMCA North Shore was painted with PaintPlus HiCover four years before this picture was taken. Centre manager Mike Lacey says he couldn’t be happier with the result.
Surface Preparation
All loose material and contaminants must be removed
Clean substrates using a water blaster or soft broom and hose to remove accumulated airborne contaminants, poorly adhering paint and loose substrate particles.Make good surface damage or imperfections
Fill all cracks and nail holes with appropriate filling compound.Previously painted enamel and polyurethane
Lightly sand to remove gloss and clean with a lint free cloth.
Prep Coat
Timber Weatherboards, Barges, Facia
Prime bare areas with Quik Prep.Galvanised Iron Cladding, ColourSteel, Galvanised Roller Doors and Zincalume
Treat corroded areas with RustGuard, prime bare areas with GalvCoat.Cementious Cladding, Concrete Block Concrete, Stucco and Solid Plaster
Prime bare areas with Masonry Sealer.PVC Spouting & Downpipes
Prime bare areas with Quik Prep.
Top Coat
Timber Weatherboards, Barges, Facia
Apply two coats of HiCover or HiGloss.Cementious Cladding, Concrete Block and Concrete
Apply two coats of HiCover or HiGloss.Stucco and Solid Plaster
Apply two coats of HiBuild 200.Galvanised Iron Cladding, ColourSteel, Galvanised Roller Doors and Zincalume
Apply two coats of HiCover or HiGloss.Timber Doors and Windows
Apply two coats of Acrynamel.PVC Spouting & Downpipes
Apply two coats of HiCover or HiGloss.
