The head office interior of New Zealand’s largest company and biggest exporter, Fonterra, is finished with PaintPlus paints.
Surface Preparation
All loose material must be removed and surface damage or imperfections made good.
Fill all cracks and nail holes, sand and wipe clean with a lint free cloth.The surface must be clean, dry and free of contaminants.
Areas with a build up of grime must be cleaned with sugar soap (or quality equivalent).Previously painted enamel and polyurethane
Lightly sand to remove gloss and clean with a lint free cloth.
Prep Coat
Paper faced Plaster board & stopping repairs
Apply one coat of Prime-All. When dry, lightly sand clean with a lint free cloth.New Timber joinery and doors
Apply one coat of Quik-Prep or Prime-All. When dry, lightly sand clean with a lint free cloth.Masonry, Villaboard, Cementious cladding
Apply one coat of Masonry Sealer.
Top Coat
High Traffic Areas, Wet areas, Doors, Door Trim, Scocia and Window frames
Clear Finish - apply three coats of AcryGlaze lightly sanding between coats if timber grain-raising occurs.
Colour Finish - apply two coats of ArmourGuard or AcrynamelWalls in Light Traffic Areas and Ceilings
Colour - apply two coats of Easi-Flow.
