This house in Campbells Bay, Auckland, was painted with PaintPlus HiCover. It looks great and is able to withstand extreme coastal conditions.
Surface Preparation
All loose material must be removed and surface damage or imperfections made good.
Fill all cracks and nail holes, sand and wipe clean with a lint free cloth.The surface must be clean, dry and free of contaminants.
Areas with a build up of grime must be cleaned with sugar soap (or quality equivalent).Previously painted enamel and polyurethane.
Lightly sand to remove gloss and clean with a lint free cloth.
Prep Coat
Paper faced Plaster board & stopping repairs
Apply one coat of Prime-All. When dry, lightly sand and clean with a lint free cloth.New Timber joinery and doors
Apply one coat of Quik-Prep or Prime-All. When dry, lightly sand and clean with a lint free cloth.Masonry, Villaboard, Cementious cladding
Apply one coat of Masonry Sealer.
Top Coat
Bathrooms, Laundries, Doors, Door Trim, Scocia and Window frames
Clear Finish - apply three coats of AcryGlaze lightly sanding between coats if timber grain-raising occurs.
Colour - apply two coats of Acrynamel or ArmourGuard.Walls
Colour - apply two coats of Easi-Flow.Ceiling
Colour - apply two coats of Easi-Flow or two coats of Ceiling Flat if light sources highlight surface imperfections.
